1200℃ Three-heating zone rotary tube furnace O1200-60III-C-RO

At the same time, the tube furnace has three heating zones with independent temperature control. Each heating zone can edit 30 sections of temperature rise and fall program, and the equipment also has overheating and break protection functions. The flanges on both sides of the furnace tube are equipped with a digital vacuum gauge and a mechanical pressure gauge, which can be used to control the atmosphere in the furnace tube. If the experiment requires the use of flammable gas, the tube furnace can be equipped with a manual ignition device to complete the exhaust gas treatment to ensure the safety and environmental protection of the experiment. 1200℃ three-heating zone rotary tube furnace application range: Tube furnaces are mainly used in metallurgy, glass, heat treatment, lithium battery positive and negative materials, new energy, abrasives and other industries, and can also be used for heat treatment in atmospheric environment. It can also be used to form a CVD system for related coating test production. The technical parameters for the 1200℃ three-heating zone rotary tube furnace, designated as Model O1200-60III-C-RO, are as follows. The furnace is equipped with a maximum power capacity of 4.5kW and utilizes a high-purity quartz tube as its construction material. The furnace tube features a diameter of 60mm at both ends and expands to 100mm in the middle, extending to a length of 1400mm. Within the furnace chamber, there is a heating zone that spans a total length of 600mm, subdivided into three equal segments of 200mm each. The furnace's operating temperature ranges from 0 to 1100℃, and it maintains a high level of temperature control accuracy at ±1℃. Temperature regulation is achieved through a 30 or 50 segment program temperature control system. Information related to the furnace's operation and parameters is displayed using a highlight digital tube display. The furnace is sealed using a 304 stainless steel vacuum flange, featuring a 1/4" ferrule connector (Ø8 pagoda-shape connector) for the flange interface. The furnace operates under a vacuum level of 4.4E-3Pa, and its power supply is compatible with AC:220V at 50/60Hz. Additionally, it has an adjustable angle of inclination ranging from 0 to 15° and can rotate at a speed between 0 and 20 rpm, offering versatility and control in various experimental settings.